CleanBoost MGO is a concentrated, fuel-borne combustion catalyst for new modern marine diesel engines. It improves the combustion of marine fuels and works in the later stages of the combustion cycle, where it catalytically enhances the combustion of hard-to-burn fuel molecules. Improved combustion converts more fuel into useful energy, translating into reduced fuel consumption, better performance at reduced levels of excess air, less particulate emissions and reduced maintenance requirements. By eliminating soot and black smoke at the source, CleanBoost MGO reduces carbon deposits and improves thermal efficiency of the engine. Maintenance schedules can also be extended. CleanBoost MGO is safe to use in large and small diesel engines.
The marine/shipping industry uses many types of fuels when out to sea because of reduced operating cost. One of the down-falls of marine fuels is the ability to flow and burn clean. CleanBoost MGO will help reduce emissions and help with a cleaner running engine. Great for reduction of emissions when using in MGO, or other heavy fuels.
Marine Fuel Oil can be dosed with CleanBoost MGO in several ways, depending on available pumping equipment and configuration of the ship’s fuel handling system. Maximum benefits are obtained when CleanBoost MGO is thoroughly mixed with fuel, as far as possible upstream of the engines. While bunkering, The additive can be metered into the fuel line with a dosing pump system, before the manifold, to treat the entire fuel supply in all storage tanks. Alternatively, CleanBoost MGO can be added to storage tanks just prior to filling them with fuel. If storage tanks are not settling tanks, it is preferable to inject the additive into the fuel transfer line to the settling tank, or to the day tank, by way of a chemical dosing or metering pump designed to work with petroleum solvents at the appropriate flow rate.
For standard grades of marine residual fuel oils, the recommended dosage rate of CleanBoost MGO is 1: 4,000. During the first week of treatment, a higher dosage rate of 1: 3,000 is recommended. When calculating the amount of additive required for an initial treatment, it is necessary to include enough additive to dose the untreated fuel already in the fuel system and tanks, in addition to dosing the incoming delivery of fuel oil.
Proprietary Technology Products:
- Helping Reduce Emissions
- Better Combustion Process
- Better Filtration Solutions
Combustion Technologies is the manufacturer of a variety of CleanBoost Fuel Treatments, CleanBoost Lubricants, CleanBoost Degreaser, CleanBoost Penetrating Spray & CleanBoost Nano-Sheen. Our Combust Filtration products help with cleaner fuels and lubes, extending oil drains and better engine performance. CleanBoost products have been used safely since 1995 in on-road & off-road engines applications helping reduce soot and maintenance issues. Our proprietary nano-technology reduces maintenance costs and helps extend oil drain intervals in most cases.
